Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Progreso, TX

Concrete Sealing for Stamped Concrete in Progreso, TX

Moderate-pressure wash for stamped concrete. Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete. Typical cost $400-$1,200.

When we handle concrete sealing for stamped concrete in Progreso, TX, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. With stamped concrete, the right approach is moderate-pressure wash.

The right method for the job

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patchesPressure

Cleaning solution: A sealer-safe cleaner; a degreaser for oil spots.

What to know about cleaning stamped concrete

Stamped and colored concrete is usually protected by a sealer. Washing it well is the first step before resealing, and the color and pattern look much better after both.

Avoid: High pressure that strips sealer unevenly or wears off color release on the surface.

How often: Wash yearly; reseal every 2-3 years.

Signs you need concrete sealing for stamped concrete

  • Water soaks in instead of beading
  • Stamped concrete looks faded and dull
  • Surface flaking or spalling has started
  • Stains soak in quickly

Where the grime comes from

  • Old sealer worn away by sun and traffic
  • Freeze-thaw cycles and deicing salts
  • Unsealed concrete absorbing oil and water

What you can do yourself

  • Do the water test: sprinkle water and see if it darkens the concrete quickly
  • Keep traffic off a newly sealed surface for the time on the label
  • Avoid deicers that contain ammonium nitrate or ammonium sulfate

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Sealing dirty or damp concrete, which traps stains and turns cloudy
  • Slippery finishes without an anti-slip additive
  • Applying too thick a coat, which peels

Our process for concrete sealing for stamped concrete

  1. Clean the concrete thoroughly
  2. Treat stains and let the surface dry
  3. Repair cracks where needed
  4. Apply a penetrating or film-forming sealer
  5. Keep traffic off until it cures

How much does concrete sealing for stamped concrete cost?

$400-$1,200Typical range for a typical driveway or patio
1 day plus cure timeTypical time on site
Every 2-5 years, depending on the sealerRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stamped concrete

Serving Progreso, TX and nearby towns

Shaded driveways, walkways and pool decks in Texas grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We provide concrete sealing for stamped concrete across Progreso (ZIP code 78579) and nearby towns including Llano Grande (2.7 mi), Mercedes (4.8 mi), Weslaco (5.1 mi) and Midway South (5.9 mi). Call (877) 658-5887 for a free quote in Progreso.

Concrete Sealing for Stamped Concrete: frequently asked questions

How much does concrete sealing for stamped concrete cost in Progreso, TX?

Concrete Sealing for Stamped Concrete typically costs $400-$1,200 for a typical driveway or patio, and usually takes 1 day plus cure time. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for concrete sealing for stamped concrete?

For stamped concrete: usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patches. What we avoid: high pressure that strips sealer unevenly or wears off color release on the surface. We keep the pressure even and controlled, with the right tools for the surface.

Is concrete sealing for stamped concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule concrete sealing for stamped concrete?

Wash yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Progreso, TX

Commercial Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $400-$2,000

Soft Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$800

Roof Cleaning for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $400-$1,000

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Brick Cleaning

Brick cleaning for walls, chimneys, steps and patios that removes algae, dirt and efflorescence without eroding mortar.

Typical $250-$700

Roof Cleaning for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $400-$1,000

HOA & Apartment Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $800-$5,000

Pre-Paint Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$600

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Paver Cleaning & Sealing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $600-$1,800

Ready for a cleaner home or business?

Get a free pressure washing quote in Progreso, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote