Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Progreso, TX

HOA & Apartment Pressure Washing for Stucco in Progreso, TX

Soft wash for stucco. Building washing, sidewalks, breezeways, pools and amenity areas for HOAs, apartments and condos. Typical cost $800-$5,000.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. HOA & Apartment Pressure Washing for Stucco in Progreso, TX brings it back, usually in a single visit. On stucco, the method we use is soft wash.

The right method for the job

Soft washCleaning method
Soft wash only, typically under 500 PSIPressure

Cleaning solution: A diluted house-wash solution with surfactant, given time to dwell, then a gentle rinse.

What to know about cleaning stucco

Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots. Hairline cracks are common, and high pressure can force water into them or break off the finish coat.

Avoid: High pressure, which can etch the texture, blow out patches and push water behind the wall.

How often: Every 1-2 years.

When to book hoa & apartment pressure washing for stucco

  • Mildew on building walls
  • Dirty breezeways and stairs
  • Stained sidewalks and curbs
  • Residents' complaints or HOA violation notices

Where the grime comes from

  • Heavy foot traffic
  • Shade and humidity
  • Shared trash and parking areas

What you can do yourself

  • Plan cleaning before inspections or paint cycles
  • Notify residents ahead of time

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Water into units through windows and doors
  • Damaged landscaping
  • Residents' cars and belongings in the spray area

How we handle hoa & apartment pressure washing for stucco

  1. Walk the property with the manager
  2. Plan a schedule and notify residents
  3. Wash buildings and breezeways
  4. Clean flatwork and amenity areas
  5. Inspect and report

How much does hoa & apartment pressure washing for stucco cost?

$800-$5,000Typical range depending on the number of buildings
One day to several weeksTypical time on site
Yearly, with flatwork more oftenRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stucco

Local hoa & apartment pressure washing for stucco for Progreso, TX

In Texas, commercial buildings and sidewalks often need cleaning several times a year, because mildew, gum and grime build up quickly in the heat.

Parts of Texas are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

Crews serve all of Progreso (ZIP code 78579), plus Llano Grande (2.7 mi), Mercedes (4.8 mi), Weslaco (5.1 mi) and Midway South (5.9 mi). Call (555) 010-0000 for a free quote in Progreso.

HOA & Apartment Pressure Washing for Stucco: frequently asked questions

How much does hoa & apartment pressure washing for stucco cost in Progreso, TX?

HOA & Apartment Pressure Washing for Stucco typically costs $800-$5,000 depending on the number of buildings, and usually takes One day to several weeks. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for hoa & apartment pressure washing for stucco?

For stucco: soft wash only, typically under 500 PSI. What we avoid: high pressure, which can etch the texture, blow out patches and push water behind the wall. The cleaning solution does most of the work, followed by a gentle rinse.

Is hoa & apartment pressure washing for stucco safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule hoa & apartment pressure washing for stucco?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Progreso, TX

Commercial Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $400-$2,000

Soft Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$800

Roof Cleaning for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $400-$1,000

Deck Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $250-$600

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Brick Cleaning

Brick cleaning for walls, chimneys, steps and patios that removes algae, dirt and efflorescence without eroding mortar.

Typical $250-$700

Roof Cleaning for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $400-$1,000

Pre-Paint Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$600

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Paver Cleaning & Sealing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $600-$1,800

Pressure Washing for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Progreso, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote